2 Piece Chevron Panel Kits - ORANGE/WHITE or RED/WHITE

2 Piece Chevron Panel Kits - ORANGE/WHITE or RED/WHITE
Click To Enlarge
  * Marked fields are required.
Price $40.00

Quantity 1 = One 2 piece chevron kit (left and right slant plus piece of seam sealing tape for the center seam)

Kits cut from High Intensity Prismatic Material.  Nikkalite brand.  Bright vivid material that is slightly thinner than a credit card.  Should be applied to flat surfaces.  Available in RED / WHITE or ORANGE / WHITE.

red white high intensity prismatic reflective panel

Two Piece Chevron Panels. Kits consist of 34 inches of left slant material and 34 inches of right slant material.  Together making a 68" long chevron panel. We also include a piece of clear seam sealing tape so that you can seal the center of the panel.  (This is not necessary but some installers prefer sealing the center.) To install simply install the left and right pieces and apply seam tape over the center. 

high intensity chevron panel kit

You can use the drop down menu at the top of this page to make your choice. (for custom sizes email me at steve@reflectivestore.com).  Color choices are:  

  • Red and White OR Orange and White

Size choices are: 

  • 4" x 68" (34" right section and 34" left) - $60
  • 6" x 68" (34" right section and 34" left) - $70
  • 8" x 68" (34" right section and 34" left) - $85
  • 12" x 68" (34" right section and 34" left) - $125

You can make your size choice using the drop down menus above. 

red orange white reflective chevron panel kit

The alternating RED/WHITE or ORANGE/WHITE stripes are 6" wide when measured diagonally.  Both colors are reflective.  The panels are self adhesive and have a peel off backing.

2 piece reflective chevron panel red white


The panels that these kits create are longer than they are tall and are designed to go on the rear or front of a vehicle.  We offer the different sizes because every vehicle is different.  The panels can be easily trimmed if necessary with scissors or an exacto. 


Our reflective chevron panels are created using Nikkalite High Intensity Prismatic film.  This is a very rugged, durable and vivid material.  The panels are very bright in the daytime, reflective at night and are easy to install.  Just peel the backing and apply to a clean, dry surface.  I use a soft cloth to press the panel on.

2 piece reflective chevron panel orange white

The panels on this page are intended to go on the back or front of trucks, SUVs or Vans but can be used in a variety of other applications.  If necessary they can be trimmed or cut for applications on other areas. As stated before the panels are made from ultra bright high intensity prismatic reflective material.