2 Piece Chevron Panel Kits - LIME and RED V98

2 Piece Chevron Panel Kits - LIME and RED V98
Click To Enlarge
  * Marked fields are required.
Price $40.00

Quantity 1 = One 2 piece chevron kit (left and right slant plus piece of seam sealing tape)

Two Piece Chevron Panel Kits in RED and FLUORESCENT LIME.  Kits consist of 34 inches of left slant material and 34 inches of right slant material.  Together making a 68" long chevron panel. We also include a piece of clear seam sealing tape so that you can seal the center of the panel.  (This is not necessary but some installers prefer sealing the center.) To install simply install the left and right pieces and apply seam tape over the center. 

2 piece chevron panel kits red lime yellow

You can use the drop down menu at the top of this page to make your choice. (for custom sizes email me at steve@reflectivestore.com).  Color choices are:  

  • Red and Fluorescent Lime Yellow

Size choices are: 

  • 2" x 68" (34" right section and 34" left) - $40
  • 3" x 68" (34" right section and 34" left) - $50
  • 4" x 68" (34" right section and 34" left) - $60
  • 6" x 68" (34" right section and 34" left) - $70
  • 8" x 68" (34" right section and 34" left) - $85
  • 12" x 68" (34" right section and 34" left) - $125
  • 15" x 68" (34" right section and 34" left) $150 

You can make your size choice using the drop down menus above. 

15 inch chevron panel kit red lime yellow

The alternating red and lime stripes are 6" wide when measured diagonally.  This is compliant with the NFPA 1901 requirements for fire apparatus.  Both colors are reflective.  The panels are self adhesive and have a peel off backing. The picture below show the clear seam tape being applied. 2 piece chevron panel nfpa kit

chevron panel red lime material tailgate

Chevron Panel NFPA Red Lime Yellow

The panels that these kits create are longer than they are tall and are designed to go on the rear or front of a vehicle.  We offer the different sizes because every vehicle is different.  The panels can be easily trimmed if necessary with scissors or an exacto. 

Brush truck reflective panels red and lime

Our reflective chevron panels are created using Orafol/Reflexite V98 Conformable Prismatic film.  This is a very rugged, durable and bright material.  The panels are very bright in the daytime and at night and are easy to install.  Just peel the backing and apply to a clean, dry surface.  I use a soft cloth to press the panel on.

red and yellow chevron panel nfpa

The panels on this page are intended to go on the back or front of trucks, SUVs or Vans but can be used in a variety of other applications.  If necessary they can be trimmed or cut for applications on other areas. As stated before the panels are made from ultra bright prismatic reflective materials. 

Related Items