Chevron Seam Sealing Tape - Clear (1/2" x 75')

Chevron Seam Sealing Tape - Clear  (1/2" x 75')
Click To Enlarge
  * Marked fields are required.
Qty*
Price $10.00

Quantity 1 = 1 roll of 1/2" x 75 foot Clear Chevron Seam Tape - $10

Our Oracal Clear Chevron Seam Tape can be used to seal the seam between two chevron panels or to seal the edge of a panel.  This protects the edges of your panel and prevents lifting thus extending the life of the application.  Application is very simple. Rated for a 6 year outdoor life.

To seal the seam between two panels you simply cut a piece to size for the seam, peel off the backing, and apply.  The tape is nearly invisible.  

To seal the edges of a panel you cut to size, peel the backing and apply all the way around the panel.  One half of the tape will be on the panel and the other half on the vehicle surface. This will assure that the edges stay down. 

Note - Since Reflexite films are made in a single layer they do not require edge sealing to protect the film. However, edge or seam sealing does extend the life of the application by holding down the edges and protecting them against damage from dirt or washings.